Woodguard Timbapreservative (Various Colours)

Finish – Low Sheen
Coverage – Approx 10 m² per litre per coat
Drying Time – Dependent upon temperature and humidity.
Coats – 2

Product Features
Long lasting protection
Weatherproof

Application
Brush or conventional spray.

Health & Safety
“Ensure that surfaces are sound and free from dust, dirt, grease and oil. Surfaces must be thoroughly dry – no more than 12% moisture content. Do not apply during cold (below 10°C) or wet weather. Do not apply directly to bare metal surfaces – stop nail holes with wood filler. Do not apply to wet or damp timber. Do not attempt to apply so thickly as to form a film – this may blister, blanch or peel off. It is important to treat the end grain of timber to prevent moisture ingress. It is important to adhere strictly to Application Methods, and to allow adequate drying between coats. N.B. WOODGARD TIMBAPRESERVATIVE is not recommended for floors or decking.”

Tips & Advice
1. Preparing the Surfaces
Suitable for application to exterior windows, doors, barge boards, etc.